mailcow-dockerized-docs/docs/firststeps-rp.md

You don't need to change the Nginx site that comes with mailcow: dockerized. mailcow: dockerized trusts the default gateway IP 172.22.1.1 as proxy.

1. Make sure you change HTTP_BIND and HTTPS_BIND in mailcow.conf to a local address and set the ports accordingly, for example:

HTTP_BIND=127.0.0.1
HTTP_PORT=8080
HTTPS_BIND=127.0.0.1
HTTPS_PORT=8443

This will also change the bindings inside the Nginx container! This is important, if you decide to use a proxy within Docker.

IMPORTANT: Do not use port 8081, 9081 or 65510!

Recreate affected containers by running docker-compose up -d.

!!! warning Make sure you run generate_config.sh before you enable any site configuration examples below. The script generate_config.sh copies snake-oil certificates to the correct location, so the services will not fail to start due to missing files.

!!! info Using the site configs below will forward ACME requests to mailcow and let it handle certificates itself. The downside of using mailcow as ACME client behind a reverse proxy is, that you will need to reload your webserver after acme-mailcow changed/renewed/created the certificate. You can either reload your webserver daily or write a script to watch the file for changes. On many servers logrotate will reload the webserver daily anyway.

If you want to use a local certbot installation, you will need to change the SSL certificate parameters accordingly.
**Make sure you run a post-hook script** when you decide to use external ACME clients. You will find an example at the bottom of this page.

2. Configure your local webserver as reverse proxy:

Apache 2.4

Required modules:

a2enmod rewrite proxy proxy_http headers ssl

Let's Encrypt will follow our rewrite, certificate requests in mailcow will work fine.

Take care of highlighted lines.

<VirtualHost *:80>
  ServerName CHANGE_TO_MAILCOW_HOSTNAME
  ServerAlias autodiscover.*
  ServerAlias autoconfig.*
  RewriteEngine on

  RewriteCond %{HTTPS} !=on
  RewriteRule ^/?(.*) https://%{HTTP_HOST}/$1 [R=301,L]

  ProxyPass / http://127.0.0.1:8080/
  ProxyPassReverse / http://127.0.0.1:8080/
  ProxyPreserveHost On
  ProxyAddHeaders On
  RequestHeader set X-Forwarded-Proto "http"
</VirtualHost>
<VirtualHost *:443>
  ServerName CHANGE_TO_MAILCOW_HOSTNAME
  ServerAlias autodiscover.*
  ServerAlias autoconfig.*

  # You should proxy to a plain HTTP session to offload SSL processing
  ProxyPass /Microsoft-Server-ActiveSync http://127.0.0.1:8080/Microsoft-Server-ActiveSync connectiontimeout=4000
  ProxyPassReverse /Microsoft-Server-ActiveSync http://127.0.0.1:8080/Microsoft-Server-ActiveSync
  ProxyPass / http://127.0.0.1:8080/
  ProxyPassReverse / http://127.0.0.1:8080/
  ProxyPreserveHost On
  ProxyAddHeaders On
  RequestHeader set X-Forwarded-Proto "https"

  SSLCertificateFile MAILCOW_PATH/data/assets/ssl/cert.pem
  SSLCertificateKeyFile MAILCOW_PATH/data/assets/ssl/key.pem

  # If you plan to proxy to a HTTPS host:
  #SSLProxyEngine On

  # If you plan to proxy to an untrusted HTTPS host:
  #SSLProxyVerify none
  #SSLProxyCheckPeerCN off
  #SSLProxyCheckPeerName off
  #SSLProxyCheckPeerExpire off
</VirtualHost>

Nginx

Let's Encrypt will follow our rewrite, certificate requests will work fine.

Take care of highlighted lines.

server {
  listen 80 default_server;
  listen [::]:80 default_server;
  server_name CHANGE_TO_MAILCOW_HOSTNAME autodiscover.* autoconfig.*;
  return 301 https://$host$request_uri;
}
server {
  listen 443;
  listen [::]:443;
  server_name CHANGE_TO_MAILCOW_HOSTNAME autodiscover.* autoconfig.*;

  ssl on;
  ssl_certificate MAILCOW_PATH/data/assets/ssl/cert.pem;
  ssl_certificate_key MAILCOW_PATH/data/assets/ssl/key.pem;
  ssl_protocols TLSv1 TLSv1.1 TLSv1.2;
  ssl_ciphers HIGH:!aNULL:!MD5;

  location /Microsoft-Server-ActiveSync {
    proxy_pass http://127.0.0.1:8080/Microsoft-Server-ActiveSync;
    proxy_set_header Host $http_host;
    proxy_set_header X-Real-IP $remote_addr;
    proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
    proxy_set_header X-Forwarded-Proto $scheme;
    proxy_connect_timeout 75;
    proxy_send_timeout 3650;
    proxy_read_timeout 3650;
    proxy_buffers 64 256k;
    client_body_buffer_size 512k;
    client_max_body_size 0;
  }

  location / {
      proxy_pass http://127.0.0.1:8080/;
      proxy_set_header Host $http_host;
      proxy_set_header X-Real-IP $remote_addr;
      proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
      proxy_set_header X-Forwarded-Proto $scheme;
      client_max_body_size 0;
  }
}

HAProxy

Important/Fixme: This example only forwards HTTPS traffic and does not use mailcows built-in ACME client.

frontend https-in
  bind :::443 v4v6 ssl crt mailcow.pem
  default_backend mailcow

backend mailcow
  option forwardfor
  http-request set-header X-Forwarded-Proto https if { ssl_fc }
  http-request set-header X-Forwarded-Proto http if !{ ssl_fc }
  server mailcow 127.0.0.1:8080 check

Optional: Post-hook script for non-mailcow ACME clients

Using a local certbot (or any other ACME client) requires to restart some containers, you can do this with a post-hook script. Make sure you change the pathes accordingly:

#!/bin/bash
cp /etc/letsencrypt/live/my.domain.tld/fullchain.pem /opt/mailcow-dockerized/data/assets/ssl/cert.pem
cp /etc/letsencrypt/live/my.domain.tld/privkey.pem /opt/mailcow-dockerized/data/assets/ssl/key.pem
# Either restart...
#postfix_c=$(docker ps -qaf name=postfix-mailcow)
#dovecot_c=$(docker ps -qaf name=dovecot-mailcow)
#nginx_c=$(docker ps -qaf name=nginx-mailcow)
#docker restart ${postfix_c} ${dovecot_c} ${nginx_c}
# ...or reload:
docker exec $(docker ps -qaf name=postfix-mailcow) postfix reload
docker exec $(docker ps -qaf name=nginx-mailcow) nginx -s reload
docker exec $(docker ps -qaf name=dovecot-mailcow) dovecot reload