nickslowinski/mailcow-dockerized-docs
1
0
Fork 0
Code Issues Pull-Requests Projekte Releases Pakete Wiki AktivitÀt

Update a bit third_party-mailman3.md

Quellcode durchsuchen
Dieser Commit ist enthalten in:
Peter 2021-10-02 22:01:04 +02:00
Ursprung 90b87c6921
Commit d60802604f
Es konnte kein GPG-SchlĂŒssel zu dieser Signatur gefunden werden
GPG-SchlĂŒssel-ID: A40EE5665510C9D5
2 geÀnderte Dateien mit 42 neuen und 41 gelöschten Zeilen
Statistiken anzeigen Patch-Datei herunterladen Diff-Datei herunterladen Alle Dateien ausklappen Alle Dateien einklappen

73
docs/third_party-mailman3.md
Datei anzeigen

@ -1,10 +1,14 @@
# Installing Mailcow and Mailman3 based on dockerized versions
# Installing mailcow and Mailman 3 based on dockerized versions
!!! info
This guide is a copy from [dockerized-mailcow-mailman](https://github.com/g4rf/dockerized-mailcow-mailman). Please post issues, questions and improvements in the [issue tracker](https://github.com/g4rf/dockerized-mailcow-mailman/issues) there.
!!! warning
mailcow is not responsible for any data loss, hardware damage or broken keyboards. This guide comes without any warranty. Make backups before starting, 'coze: **No backup no pity!**
## Introduction
This guide aims to install and configure [mailcow-dockerized](https://github.com/mailcow/mailcow-dockerized) with [docker-mailman](https://github.com/maxking/docker-mailman) and to provide some useful scripts. An essential condition is, to preserve *Mailcow* and *Mailman* in their own installations for independent updates.
This guide aims to install and configure [mailcow-dockerized](https://github.com/mailcow/mailcow-dockerized) with [docker-mailman](https://github.com/maxking/docker-mailman) and to provide some useful scripts. An essential condition is, to preserve *mailcow* and *Mailman* in their own installations for independent updates.
There are some guides and projects on the internet, but they are not up to date and/or incomplete in documentation or configuration. This guide is based on the work of:
@ -15,24 +19,20 @@ After finishing this guide, [mailcow-dockerized](https://github.com/mailcow/mail
The operating system used is an *Ubuntu 20.04 LTS*.
## Disclaimer
I'm not responsible for any data loss, hardware damage or broken keyboards. This guide comes without any warranty. Make backups before starting, 'coze: **No backup no pity!**
## Installation
This guide ist based on different steps:
This guide is based on different steps:
1. DNS setup
1. Install *Apache* as a reverse proxy
1. Obtain ssl certificates with *Let's Encrypt*
1. Install *Mailcow* with *Mailman* integration
1. Obtain SSL certificates with *Let's Encrypt*
1. Install *mailcow* with *Mailman* integration
1. Install *Mailman*
1. 🏃 Run
### DNS setup
Most of the configuration ist covered by *Mailcow*s [DNS setup](https://mailcow.github.io/mailcow-dockerized-docs/prerequisite-dns/). After finishing this setup add another subdomain for *Mailman*, e.g. `lists.example.org` that points to the same server:
Most of the configuration is covered by *mailcow*s [DNS setup](https://mailcow.github.io/mailcow-dockerized-docs/prerequisite-dns/). After finishing this setup add another subdomain for *Mailman*, e.g. `lists.example.org` that points to the same server:
```
# Name Type Value
@ -52,9 +52,9 @@ a2enmod rewrite proxy proxy_http headers ssl wsgi proxy_uwsgi http2
Maybe you have to install further packages to get these modules. This [PPA](https://launchpad.net/~ondrej/+archive/ubuntu/apache2) by *Ondƙej SurĂœ* may help you.
#### vhost configuration
#### vHost configuration
Copy the [mailcow.conf](https://github.com/g4rf/dockerized-mailcow-mailman/tree/master/apache/mailcow.conf) and the [mailman.conf](https://github.com/g4rf/dockerized-mailcow-mailman/tree/master/apache/mailman.conf) to the *Apache* conf folder `sites-available` (e.g. under `/etc/apache2/sites-available`).
Copy the [mailcow.conf](https://github.com/g4rf/dockerized-mailcow-mailman/tree/master/apache/mailcow.conf) and the [mailman.conf](https://github.com/g4rf/dockerized-mailcow-mailman/tree/master/apache/mailman.conf) in the *Apache* conf folder `sites-available` (e.g. under `/etc/apache2/sites-available`).
Change in `mailcow.conf`:
- `MAILCOW_HOSTNAME` to your **MAILCOW_HOSTNAME**
@ -65,7 +65,7 @@ Change in `mailman.conf`:
**Don't activate the configuration, as the ssl certificates and directories are missing yet.**
### Obtain ssl certificates with *Let's Encrypt*
### Obtain SSL certificates with *Let's Encrypt*
Check if your DNS config is available over the internet and points to the right IP addresses, e.g. with [MXToolBox](https://mxtoolbox.com):
@ -83,19 +83,19 @@ apt install certbot
Get the desired certificates (as *root* or *sudo*):
```
certbot certonly -d MAILCOW_HOSTNAME
certbot certonly -d mailcow_HOSTNAME
certbot certonly -d MAILMAN_DOMAIN
```
### Install *Mailcow* with *Mailman* integration
### Install *mailcow* with *Mailman* integration
#### install Mailcow
#### Install mailcow
Follow the [Mailcow installation](https://mailcow.github.io/mailcow-dockerized-docs/i_u_m_install/). **Omit step 5 and do not pull and up with `docker-compose`!**
Follow the [mailcow installation](https://mailcow.github.io/mailcow-dockerized-docs/i_u_m_install/). **Omit step 5 and do not pull and up with `docker-compose`!**
#### configure Mailcow
#### Configure mailcow
This is also **Step 4** in the official *Mailcow installation* (`nano mailcow.conf`). So change to your needs and alter the following variables:
This is also **Step 4** in the official *mailcow installation* (`nano mailcow.conf`). So change to your needs and alter the following variables:
```
HTTP_PORT=18080 # don't use 8080 as mailman needs it
@ -103,13 +103,13 @@ HTTP_BIND=127.0.0.1 #
HTTPS_PORT=18443 # you may use 8443
HTTPS_BIND=127.0.0.1 #
SKIP_LETS_ENCRYPT=y # reverse proxy will do the ssl termination
SKIP_LETS_ENCRYPT=y # reverse proxy will do the SSL termination
SNAT_TO_SOURCE=1.2.3.4 # change this to your ipv4
SNAT6_TO_SOURCE=dead:beef # change this to your global ipv6
SNAT_TO_SOURCE=1.2.3.4 # change this to your IPv4
SNAT6_TO_SOURCE=dead:beef # change this to your global IPv6
```
#### add Mailman integration
#### Add Mailman integration
Create the file `/opt/mailcow-dockerized/docker-compose.override.yml` (e.g. with `nano`) and add the following lines:
@ -127,8 +127,9 @@ networks:
docker-mailman_mailman:
external: true
```
The additional volume is used by *Mailman* to generate additional config files for *Mailcow postfix*. The external network is build and used by *Mailman*. *Mailcow* needs it to deliver incoming list mails to *Mailman*.
dockerized-mailcow-mailman
The additional volume is used by *Mailman* to generate additional config files for *mailcow postfix*. The external network is build and used by *Mailman*. *mailcow* needs it to deliver incoming list mails to *Mailman*.
Create the file `/opt/mailcow-dockerized/data/conf/postfix/extra.cf` (e.g. with `nano`) and add the following lines:
```
@ -158,16 +159,16 @@ relay_recipient_maps =
proxy:mysql:/opt/postfix/conf/sql/mysql_relay_recipient_maps.cf,
regexp:/opt/mailman/core/var/data/postfix_lmtp
```
As we overwrite *Mailcow postfix* configuration here, this step may break your normal mail transports. Check the [original configuration files](https://github.com/mailcow/mailcow-dockerized/tree/master/data/conf/postfix) if anything changed.
As we overwrite *mailcow postfix* configuration here, this step may break your normal mail transports. Check the [original configuration files](https://github.com/mailcow/mailcow-dockerized/tree/master/data/conf/postfix) if anything changed.
#### ssl certificates
#### SSL certificates
As we proxying *Mailcow*, we need to copy the ssl certificates into the *Mailcow* file structure. This task will do the script [renew-ssl.sh](https://github.com/g4rf/dockerized-mailcow-mailman/tree/master/scripts/renew-ssl.sh) for us:
As we proxying *mailcow*, we need to copy the SSL certificates into the *mailcow* file structure. This task will do the script [renew-ssl.sh](https://github.com/g4rf/dockerized-mailcow-mailman/tree/master/scripts/renew-ssl.sh) for us:
- copy the file to `/opt/mailcow-dockerized`
- change **MAILCOW_HOSTNAME** to your *Mailcow* hostname
- make it executable (`chmod a+x renew-ssl.sh`)
- **do not run it yet, as we first need Mailman**
- Copy the file to `/opt/mailcow-dockerized`
- Change **mailcow_HOSTNAME** to your *mailcow* hostname
- Make it executable (`chmod a+x renew-ssl.sh`)
- **Do not run it yet, as we first need Mailman**
You have to create a *cronjob*, so that new certificates will be copied. Execute as *root* or *sudo*:
@ -195,7 +196,7 @@ git clone https://github.com/maxking/docker-mailman
cd docker-mailman
```
#### configure Mailman
#### Configure Mailman
Create a long key for *Hyperkitty*, e.g. with the linux command `cat /dev/urandom | tr -dc a-zA-Z0-9 | head -c30; echo`. Save this key for a moment as HYPERKITTY_KEY.
@ -241,7 +242,7 @@ At `mailman-web` fill in correct values for `SERVE_FROM_DOMAIN` (e.g. `lists.exa
About other configuration options read [Mailman-web](https://github.com/maxking/docker-mailman#mailman-web-1) and [Mailman-core](https://github.com/maxking/docker-mailman#mailman-core-1) documentation.
#### configure Mailman core and Mailman web
#### Configure Mailman core and Mailman web
Create the file `/opt/mailman/core/mailman-extra.cfg` with the following content. `mailman@example.org` should be pointing to a valid mail box or redirection.
@ -301,13 +302,13 @@ docker-compose restart postfix-mailcow
## Update
**Mailcow** has it's own update script in `/opt/mailcow-dockerized/update.sh', [see the docs](https://mailcow.github.io/mailcow-dockerized-docs/i_u_m_update/).
**mailcow** has it's own update script in `/opt/mailcow-dockerized/update.sh', [see the docs](https://mailcow.github.io/mailcow-dockerized-docs/i_u_m_update/).
For **Mailman** just fetch the newest version from the [github repository](https://github.com/maxking/docker-mailman).
## Backup
**Mailcow** has an own backup script. [Read the docs](https://mailcow.github.io/mailcow-dockerized-docs/b_n_r_backup/) for further informations.
**mailcow** has an own backup script. [Read the docs](https://mailcow.github.io/mailcow-dockerized-docs/b_n_r_backup/) for further informations.
**Mailman** won't state backup instructions in the README.md. In the [gitbucket of pgollor](https://gitbucket.pgollor.de/docker/mailman-mailcow-integration/blob/master/mailman-backup.sh) is a script that may be helpful.

2
mkdocs.yml
Datei anzeigen

@ -133,12 +133,12 @@ nav:
- 'Exchange Hybrid Setup': 'third_party-exchange_onprem.md'
- 'Gitea': 'third_party-gitea.md'
- 'Gogs': 'third_party-gogs.md'
- 'Mailman3': 'third_party-mailman3.md'
- 'Mailpiler Integration': 'third_party-mailpiler_integration.md'
- 'Nextcloud': 'third_party-nextcloud.md'
- 'Portainer': 'third_party-portainer.md'
- 'Roundcube': 'third_party-roundcube.md'
- 'SOGo Connector for Thunderbird': 'third_party-thunderbird.md'
- 'Mailman3': 'third_party-mailman3.md'
extra:
palette:
primary: "indigo"