# syntax=docker/dockerfile:1

# This file was generated using a Jinja2 template.
# Please make your changes in `Dockerfile.j2` and then `make` the individual Dockerfiles.

{% set build_stage_base_image = "rust:1.67-bullseye" %}
{% if "alpine" in target_file %}
{%   if "amd64" in target_file %}
{%     set build_stage_base_image = "blackdex/rust-musl:x86_64-musl-stable-1.67.0" %}
{%     set runtime_stage_base_image = "alpine:3.17" %}
{%     set package_arch_target = "x86_64-unknown-linux-musl" %}
{%   elif "armv7" in target_file %}
{%     set build_stage_base_image = "blackdex/rust-musl:armv7-musleabihf-stable-1.67.0" %}
{%     set runtime_stage_base_image = "balenalib/armv7hf-alpine:3.17" %}
{%     set package_arch_target = "armv7-unknown-linux-musleabihf" %}
{%   elif "armv6" in target_file %}
{%     set build_stage_base_image = "blackdex/rust-musl:arm-musleabi-stable-1.67.0" %}
{%     set runtime_stage_base_image = "balenalib/rpi-alpine:3.17" %}
{%     set package_arch_target = "arm-unknown-linux-musleabi" %}
{%   elif "arm64" in target_file %}
{%     set build_stage_base_image = "blackdex/rust-musl:aarch64-musl-stable-1.67.0" %}
{%     set runtime_stage_base_image = "balenalib/aarch64-alpine:3.17" %}
{%     set package_arch_target = "aarch64-unknown-linux-musl" %}
{%   endif %}
{% elif "amd64" in target_file %}
{%   set runtime_stage_base_image = "debian:bullseye-slim" %}
{% elif "arm64" in target_file %}
{%   set runtime_stage_base_image = "balenalib/aarch64-debian:bullseye" %}
{%   set package_arch_name = "arm64" %}
{%   set package_arch_target = "aarch64-unknown-linux-gnu" %}
{%   set package_cross_compiler = "aarch64-linux-gnu" %}
{% elif "armv6" in target_file %}
{%   set runtime_stage_base_image = "balenalib/rpi-debian:bullseye" %}
{%   set package_arch_name = "armel" %}
{%   set package_arch_target = "arm-unknown-linux-gnueabi" %}
{%   set package_cross_compiler = "arm-linux-gnueabi" %}
{% elif "armv7" in target_file %}
{%   set runtime_stage_base_image = "balenalib/armv7hf-debian:bullseye" %}
{%   set package_arch_name = "armhf" %}
{%   set package_arch_target = "armv7-unknown-linux-gnueabihf" %}
{%   set package_cross_compiler = "arm-linux-gnueabihf" %}
{% endif %}
{% if package_arch_name is defined %}
{%   set package_arch_prefix = ":" + package_arch_name %}
{% else %}
{%   set package_arch_prefix = "" %}
{% endif %}
{% if package_arch_target is defined %}
{%   set package_arch_target_param = " --target=" + package_arch_target %}
{% else %}
{%   set package_arch_target_param = "" %}
{% endif %}
{% if "buildkit" in target_file %}
{%   set mount_rust_cache = "--mount=type=cache,target=/root/.cargo/git --mount=type=cache,target=/root/.cargo/registry " %}
{% else %}
{%   set mount_rust_cache = "" %}
{% endif %}
# Using multistage build:
# 	https://docs.docker.com/develop/develop-images/multistage-build/
# 	https://whitfin.io/speeding-up-rust-docker-builds/
####################### VAULT BUILD IMAGE  #######################
{% set vault_version = "v2023.1.1" %}
{% set vault_image_digest = "sha256:d5f71fb05c4b87935bf51d84140db0f8716cabfe2974fbee6c0c5ee8cf7dab5a" %}
# The web-vault digest specifies a particular web-vault build on Docker Hub.
# Using the digest instead of the tag name provides better security,
# as the digest of an image is immutable, whereas a tag name can later
# be changed to point to a malicious image.
#
# To verify the current digest for a given tag name:
# - From https://hub.docker.com/r/vaultwarden/web-vault/tags,
#   click the tag name to view the digest of the image it currently points to.
# - From the command line:
#     $ docker pull vaultwarden/web-vault:{{ vault_version }}
#     $ docker image inspect --format "{{ '{{' }}.RepoDigests}}" vaultwarden/web-vault:{{ vault_version }}
#     [vaultwarden/web-vault@{{ vault_image_digest }}]
#
# - Conversely, to get the tag name from the digest:
#     $ docker image inspect --format "{{ '{{' }}.RepoTags}}" vaultwarden/web-vault@{{ vault_image_digest }}
#     [vaultwarden/web-vault:{{ vault_version }}]
#
FROM vaultwarden/web-vault@{{ vault_image_digest }} as vault

########################## BUILD IMAGE  ##########################
FROM {{ build_stage_base_image }} as build

# Build time options to avoid dpkg warnings and help with reproducible builds.
ENV DEBIAN_FRONTEND=noninteractive \
    LANG=C.UTF-8 \
    TZ=UTC \
    TERM=xterm-256color \
    CARGO_HOME="/root/.cargo" \
    USER="root"

# Create CARGO_HOME folder and don't download rust docs
RUN {{ mount_rust_cache -}} mkdir -pv "${CARGO_HOME}" \
    && rustup set profile minimal

{% if "alpine" in target_file %}
{%   if "armv6" in target_file %}
# To be able to build the armv6 image with mimalloc we need to specifically specify the libatomic.a file location
ENV RUSTFLAGS='-Clink-arg=/usr/local/musl/{{ package_arch_target }}/lib/libatomic.a'
{%   endif %}
{% elif "arm" in target_file %}
# Install build dependencies for the {{ package_arch_name }} architecture
RUN dpkg --add-architecture {{ package_arch_name }} \
    && apt-get update \
    && apt-get install -y \
        --no-install-recommends \
        gcc-{{ package_cross_compiler }} \
        libc6-dev{{ package_arch_prefix }} \
        libcap2-bin \
        libmariadb-dev{{ package_arch_prefix }} \
        libmariadb-dev-compat{{ package_arch_prefix }} \
        libmariadb3{{ package_arch_prefix }} \
        libpq-dev{{ package_arch_prefix }} \
        libpq5{{ package_arch_prefix }} \
        libssl-dev{{ package_arch_prefix }} \
    #
    # Make sure cargo has the right target config
    && echo '[target.{{ package_arch_target }}]' >> "${CARGO_HOME}/config" \
    && echo 'linker = "{{ package_cross_compiler }}-gcc"' >> "${CARGO_HOME}/config" \
    && echo 'rustflags = ["-L/usr/lib/{{ package_cross_compiler }}"]' >> "${CARGO_HOME}/config"

# Set arm specific environment values
ENV CC_{{ package_arch_target | replace("-", "_") }}="/usr/bin/{{ package_cross_compiler }}-gcc" \
    CROSS_COMPILE="1" \
    OPENSSL_INCLUDE_DIR="/usr/include/{{ package_cross_compiler }}" \
    OPENSSL_LIB_DIR="/usr/lib/{{ package_cross_compiler }}"
{% elif "amd64" in target_file %}
# Install build dependencies
RUN apt-get update \
    && apt-get install -y \
        --no-install-recommends \
        libcap2-bin \
        libmariadb-dev \
        libpq-dev
{% endif %}

# Creates a dummy project used to grab dependencies
RUN USER=root cargo new --bin /app
WORKDIR /app

# Copies over *only* your manifests and build files
COPY ./Cargo.* ./
COPY ./rust-toolchain ./rust-toolchain
COPY ./build.rs ./build.rs

{% if package_arch_target is defined %}
RUN {{ mount_rust_cache -}} rustup target add {{ package_arch_target }}
{% endif %}

# Configure the DB ARG as late as possible to not invalidate the cached layers above
{% if "alpine" in target_file %}
# Enable MiMalloc to improve performance on Alpine builds
ARG DB=sqlite,mysql,postgresql,enable_mimalloc
{% else %}
ARG DB=sqlite,mysql,postgresql
{% endif %}

# Builds your dependencies and removes the
# dummy project, except the target folder
# This folder contains the compiled dependencies
RUN {{ mount_rust_cache -}} cargo build --features ${DB} --release{{ package_arch_target_param }} \
    && find . -not -path "./target*" -delete

# Copies the complete project
# To avoid copying unneeded files, use .dockerignore
COPY . .

# Make sure that we actually build the project
RUN touch src/main.rs

# Builds again, this time it'll just be
# your actual source files being built
RUN {{ mount_rust_cache -}} cargo build --features ${DB} --release{{ package_arch_target_param }}

{% if "buildkit" in target_file %}
# Add the `cap_net_bind_service` capability to allow listening on
# privileged (< 1024) ports even when running as a non-root user.
# This is only done if building with BuildKit; with the legacy
# builder, the `COPY` instruction doesn't carry over capabilities.
{%   if package_arch_target is defined %}
RUN setcap cap_net_bind_service=+ep target/{{ package_arch_target }}/release/vaultwarden
{%   else %}
RUN setcap cap_net_bind_service=+ep target/release/vaultwarden
{%   endif %}
{% endif %}

######################## RUNTIME IMAGE  ########################
# Create a new stage with a minimal image
# because we already have a binary built
FROM {{ runtime_stage_base_image }}

ENV ROCKET_PROFILE="release" \
    ROCKET_ADDRESS=0.0.0.0 \
    ROCKET_PORT=80
{%- if "alpine" in runtime_stage_base_image %} \
    SSL_CERT_DIR=/etc/ssl/certs
{% endif %}


{% if "amd64" not in target_file %}
RUN [ "cross-build-start" ]
{% endif %}

# Create data folder and Install needed libraries
RUN mkdir /data \
{% if "alpine" in runtime_stage_base_image %}
    && apk add --no-cache \
        ca-certificates \
        curl \
        openssl \
        tzdata
{% else %}
    && apt-get update && apt-get install -y \
    --no-install-recommends \
    ca-certificates \
    curl \
    libmariadb-dev-compat \
    libpq5 \
    openssl \
    && apt-get clean \
    && rm -rf /var/lib/apt/lists/*
{% endif %}

{% if "armv6" in target_file and "alpine" not in target_file %}
# In the Balena Bullseye images for armv6/rpi-debian there is a missing symlink.
# This symlink was there in the buster images, and for some reason this is needed.
RUN ln -v -s /lib/ld-linux-armhf.so.3 /lib/ld-linux.so.3

{% endif -%}

{% if "amd64" not in target_file %}
RUN [ "cross-build-end" ]
{% endif %}

VOLUME /data
EXPOSE 80
EXPOSE 3012

# Copies the files from the context (Rocket.toml file and web-vault)
# and the binary from the "build" stage to the current stage
WORKDIR /
COPY --from=vault /web-vault ./web-vault
{% if package_arch_target is defined %}
COPY --from=build /app/target/{{ package_arch_target }}/release/vaultwarden .
{% else %}
COPY --from=build /app/target/release/vaultwarden .
{% endif %}

COPY docker/healthcheck.sh /healthcheck.sh
COPY docker/start.sh /start.sh

HEALTHCHECK --interval=60s --timeout=10s CMD ["/healthcheck.sh"]

CMD ["/start.sh"]